Updated: 2020-03-31 Views: 69
Good morning friends! We have been super busy this month already! How have you been？ If you haven’；t already checked out my first fall tour and our front porch this year， take a look! While you are looking through the house， you might notice a tray that keeps popping up. It’；s so versatile and beautiful. But guess what？ It’；s all DIY， made by Jordan， and built with less than $10 worth of materials! Keep reading if you’；d like to build one too!
I am going to show you how to build a tray that is4 boards in width. It’；s the perfect size for all of your needs.vintage cushion covers
If you need a larger tray， check out how to obtain material list / cuts/ assembly directions below!
This post contains affiliate links. If you shop from my blogaccent pillow case baby boudoir， I may be compensated for clicks or purchases that you make. Read my disclaimer page for more information.
If you would like to see the materials &； cuts needed for a larger 5 boardwood tray， sign up here. Email subscribers have exclusive access to the Resource Library which includes freebies like this!
Using a Miter Saw， cut your wood using the dimensions above.
For this， you will need a Kreg Pocket Hole Jig. If you don’；t already have one， consider investing in one. It has made our DIY abilities sky rocket AND it’；s super easy to learn how to use. It’；s like instant DIY build gratification!
Alright， off my Kreg Jig， soap box. Drill your pocket holes using the illustration below.
As a guide， begin 4″； in on the first board， 9″；， then another 4″； from the other side. For the second board， the dimensions are 6″； &； 9″；. Continue with the 4/6/9 pattern as shown.
Next，find your center of the end pieces. Mark your points. Drill your holes for your decorative handles.
Line up your wood bottom as shown in the illustration.
Using your various clamps， begin assembling the boards， one at a time. To avoid board warping or cupping， Jordan had a vise clamp attached to a straight board. This kept the pieces from moving while being joined (see the picture below).
Drill in the screws， building upon on each board.You’；ll keep adding one pieceto the pieces already screwed together. With the tray base assembled， roughly sand the entire piece with an orbital sander.
Next sand the side pieces and upper tray corners until smooth.
Next， use your right angle clamp and begin joining the tray &； sides together withthe middle screw. Fastentogether. Move the right angle clamp to the outside edges as you continue on.
Once assembled， run a sander over the tray to desired texture.
We had some stain on-hand from past DIY projects. Apply one to two coats. At this time you can either finish the project off with two coats of polyurethane OR add some fun decor (we did a monogram)! Once you have the monogram done， finish with the polyurethane.
Complete your project by screwing in your decorative handles!
The picture above is the 5 rail tray. You can see we did a satin poly coat to make it look less modern and more aged.
This is a super easy project that cost us less than $10 in lumber， screws， and handles. You can easily make it one afternoon and size it just right for your table! Add your own personal touch with your stain choice and fun handles.
Following two discussions recently, one with my hairdressers and one with a shop assistant. Why don't I wear dresses or bye them very often?
Today’s?tutorial teaching you how to make vintage soda crates is a part of the Cricut Summer Love Color Series.? The featured color this week is “lime” and I’m excited to be sharing a free SVG? file for the Lime Crush Soda Crate along with my project today. To learn how to make your own DIY Farmhouse Decor Vintage Soda Crate just keep reading! This post contains affiliate links.
Have you ever heard of a quilted postcard? I hadn’t until our last meeting of the Chicago Modern Quilt Guild! (Click this link to learn about the Modern Quilt Guild?and find a chapter near you)?Each of us used scraps and trims to stitch our own mini-quilt onto a small piece of? heavy craft interfacing and then attached the postcard backing with fusible webbing. I used some scraps of old men’s silk ties along with some cottons and tried the piece as you go method, stitching directly on the heavy craft interfacing. I really liked using this method with the small pieces, and it was fun to see it come together.